Fit new dishwasher in your kitchen

fit-dishwasherYou’ve purchased a new dishwasher, and now you need it fitted. We have fitted most makes and models including Miele Bosch Fisher&Paykel, Smeg, Westinghouse, Dishlex, LG, Delonghi, Asko, Electrolux, Omega, Ariston, AEG, and Beko.

Most dishwashers are built around the same functionality and design principles and they are generally a fit and forget investment as long as the original fitting is done correctly.

We are qualified to install your dishwasher – whether it’s a freestanding or underbench.

We will do the following:

check  Carefully check water and waste hoses

check  Draw hoses into cupboard to connections

check  Connect water hose to appropriate control valve

check  Open valve to charge hose and test for leaks

check  Connect waste hose to appropriate connection on S or P trap on sink waste and secure

check  Turn on dishwasher to short cycle and ensure water ingress and egress – this is important as your dishwasher won’t operate properly unless the water can flow in and out freely.

check  Check for leaks.

That last step is important as even the smallest leaks can cause serious damage inside your cabinets. We have seen expensive disasters too often where a non-plumber fitted a dishwasher which looked fine from the outside, but was dripping water on the inside. If you don’t already know, if this happens, your insurance company won’t cover the damage unless it was fitted by a certified plumber.

We recommend an Electronic Solenoid AquaStop or a Mechanical AquaStop Hose as an extra precaution when installing your brand new dishwasher.

BOOK NOW to secure the time slot that is convenient for you.

GST inclusive (SAVE $117)
  • Time required to perform task: 60 minutes

Inclusions: Installation with fittings provided.
Exclusions: Upgrade control valves. Provide waste discharge. Remove old dishwasher or packaging from site. Moving your old machine in or out or up/down flights of stairs, etc. Rubbish removal